AA26

Date of manufacture: April 2026
Location: Andale, Kansas, USA
Notes: Second production run with same materials as March 2026

Structural Components (Resin-Printed)
- Nose piece — UV-cured photopolymer resin
- Tail piece — UV-cured photopolymer resin
- Universal tips (2 pcs) — UV-cured photopolymer resin
- Wing holder (canard) — UV-cured photopolymer resin
- Wing holder (main wing) — UV-cured photopolymer resin
- Mid-body main-wing clip — UV-cured photopolymer resin

Fasteners
- Two (2) M3 bolts — steel
- Two (2) M3 nuts — steel

Aerodynamic Surfaces (Coroplast)
- Canard — coroplast (cut from same sheet as main wing)
- Main wing — coroplast

Fuselage Core
- 8" × 0.315" × 0.315" wooden fuselage beam- poplar 

Winglet Reinforcement Wire  
-18ga wire